AEG 36" 3009VNM-M User Manual page 30

P - Trouble Shooting Guide
Symptom
No power supplied to appliance
Oven power is on but appliance does not
operate
Oven power is on but there is no heat
Rubber seal has gap/s at bottom and
ends do not meet
Display is flashing, is only part
illuminated or is cycling through various
displays.
Remedy
Has the power been disconnected? Check the meter
box. Has the main fuse or circuit breaker blown or
tripped?
Oven may be set on AUTO (see auto programmed
cooking)
Oven may be set on AUTO
Oven temperature may be set OFF
Mode may be on incorrect selection
Correct - doors are sealed this way for oven venting
purposes
Turn power supply to appliance off, wait 30 seconds and
turn power on. Reset clock
30