Progress Bar - Kenmore 665.60639 Use & Care Manual

COOKING IN STAGES
(CONT.)
Example for 50% cook power:
TOUCH YOU SEE
OR
(repeat until desired
cook power appears)
5, Repeat Steps 2, 3, and 4 to set the
cooking time and cook power for
each additional stage,
6, Start the oven,
TOUCH YOU SEE
At the end of the cooking time:
YOU SEE
(four tones will sound)
You can change cooking times or cook powers for
a stage any time after that stage starts by
repeating Steps 2, 3 and/or 4 and 5.
After the first stage is over, you will hear 2
tones. The next stage(s) will count down.
PROGRESS BAR
The display contains a Progress Bar, which indi-
cates how far the Auto Cook functions have gone
and how much more the functions have to go. The
full length of the bar represents the estimated run-
ning time of the cooking cycle. The Progress Bar
advances line by line during a cycle.
The 12 segments on the Progress Bar give an
estimate of progress during cooking and show the
ratio of the time remaining on Auto Cook functions.
At the end of the cooking cycle, all 12 segments
will be lighted.
NOTE: The Progress Bar appears with Auto Cook,
Zip Defrost, Auto Reheat and Quick Touch, but not
with Manual Cooking functions.
21