External Connectors - Asus P2B-D2 User Manual

Dual pentium ii motherboard

Hide thumbs Also See for P2B-D2:

Table of Contents

5. External Connectors

WARNING!

Some pins are used for connectors or power sources. Placing jumper

caps over these will cause damage to your motherboard.

IMPORTANT: Ribbon cables should always be connected with the red stripe on the

Pin 1 side of the connector. The four corners of the connectors are labeled on the

motherboard. Pin 1 is the side closest to the power connector on hard drives and floppy

drives. IDE ribbon cable must be less than 46cm (18in), with the second drive connec-

tor no more than 15cm (6in) from the first connector.

1. PS/2 Keyboard Connector (6 pin Female)

This connection is for a standard keyboard using an PS/2 plug (mini DIN). This

connector will not allow standard AT size (large DIN) keyboard plugs. You

may use a DIN to mini DIN adapter on standard AT keyboards.

PS/2 Keyboard (6 pin Female)

2. PS/2 Mouse Connector (6 pin Female)

The system will direct IRQ12 to the PS/2 mouse if one is detected. If not de-

tected, expansion cards can use IRQ12. See "PS/2 Mouse Function Control" in

BIOS Features Setup of the BIOS SOFTWARE.

PS/2 Mouse (6 pin Female)

III. INSTALLATION

ASUS P2B-D2 User's Manual

Table of Contents