Recommended Heatsinks; Aavid Heatsink; Elan Vital Heatsink - Asus P2B-D2 User Manual

Dual pentium ii motherboard

Hide thumbs Also See for P2B-D2:

Table of Contents

III. INSTALLATION

Recommended Heatsinks

The recommended heatsinks for the Pentium II processor are those with three-pin

fans that can be connected to the CPU fan connector on the motherboard. These

heatsinks have the added benefits of proper heat dissipation and with the LM78

hardware monitor, the ability to monitor the fan's RPM and use the alert function

through monitoring programs such as LDCM and ASMM.

IMPORTANT: The heatsinks must not be more than 2.8 cm (1.1 inch) thick.

2.8 cm (1.1 inch)

The procedures for installing the Elan Vital heatsink with fan is also similar to the

steps for installing the AAVID heatsink. The Elan Vital heatsink, however, comes

with a lever to clamp the heatsink into the SEC cartridge. Mount the heatsink in the

orientation as shown then flip the lever from "Unlock" to "Lock."

ASUS P2B-D2 User's Manual

Table of Contents