I960 Memory (Simm); Simm Installation - Asus P2B-D2 User Manual

Dual pentium ii motherboard

Hide thumbs Also See for P2B-D2:

Table of Contents

i960 Memory (SIMM)

The i960 processor supports two 72-pin, 32-bit SIMMs (Single-Inline Memory

Modules) of 4, 8, 16, 32, 64, or 128MB to form a memory size between 8MB to

256MB. Only Extended Data Output (EDO) DRAM, non-parity SIMMs can be sup-

ported by the i960 processor.

IMPORTANT: You must use i960 SIMM socket 1 when using only one module.

1. The SIMM memory modules will fit in only one orientation as shown because

the plastic safety tab on one end of the SIMM sockets requires the notched end

of the SIMM memory modules.

P2B-D2 72-Pin i960 SIMM Sockets

2. Press the memory module firmly into place starting from a 45-degree angle,

making sure that all the contacts are aligned with the socket.

3. With your fingertips, rock the memory module into a vertical position so that it

clicks into place. The plastic guides should go through the two mounting holes

and the clips should snap.

Clip

Mounting Hole

Plastic Safety Tab (This Side Only)

4. To release the memory module, push both clips outward and rock the module

out of the clips.

III. INSTALLATION

ASUS P2B-D2 User's Manual

Notched End

i960 SIMM Sockets

Mounting Hole

Table of Contents