Bosch D623 Series User Manual page 37

.
Table 8: Control Panel Event Descriptions (continued)
Event # Event
153 User Code
Area Set
154 User Code
Change
175 Rstrl, Alarm,
Miss
176 Rstrl, Trble,
Miss
177 Rstl, Low
Signl
178 UnBypass,
Fire,
RAM IV
179 UnBypass,
Ctrl,
RAM IV
Bosch Security Systems | 9/04 | 46841E
D623 Series/D625 Series | User's Guide | Control Panel Event Descriptions
Description
User Code "added" by assigning
area.
User Code changed.
Restoral from Missing. Local event,
no report.
Local event. No report.
Restoral from alternate
communication low signal strength
event.
Bypass on Fire detection device(s)
cleared using RAM IV (unbypass).
Bypass on Controlled detection
devices(s) cleared using RAM IV
(unbypass).
Event # Event
173 Rstrl, Swinger
174 Rstrl, Fire,
Miss
180 UnBypass,
24-hr.,
RAM IV
181 RF Battery
Low
182 RF Battery
Rstl
183 Default PINS
184 Default PINS
Rstl
Description
Restoral from Swinger Bypass.
Restoral from Fire Missing. Local
event, no report.
Bypass on 24-hr detection
device(s) cleared using RAM IV
(unbypass).
Low battery condition on RF
keyfob.
Low battery condition on RF keyfob
cleared.
Installer or User PINs are not
changed from default. Local event
only.
Installer or User default PINs are
changed. Local event only.
37