Control Pad Functions - Kenmore 790.4558 Series Use & Care Manual

Control Pad Functions
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various functions of the oven as described below.
CLOCK SET PAD-- COOK TIME UP and DOWN ARROW PADS-- BAKE PAD-- FEATURE iNDICATOR
Used to set the time PAD-- Used to Used along with the function pads Used to select LIGHTS-- These light
of day. _ enter the length of to select oven temperature, cook the bake to show which feature is
,,_n_the baking time. time, start time (when programming function, in use.
OVEN INTERIOR \\ an automatic start time), time o f / BROIL PAD--
LIGHTPAD-- _ \ day,cleantimeand minutetimer. I / Usedto select
Used to turn oven _ X
\ I /
the variable broil
interior light ON _ _ • _ • _ _ • e/ ._function.
or OFF
_
,'_t_ , _ook _ _r >/. %) I @ I c ^ 1/Bake
I Bro
I WARM,HOLD
SELECTCLEAN
- . _ T,me _ , ,,
PAD-- Used to
PAD-- Used to • • • o OVEN • _ set the Warm &
CleaningSelect the Self=cycle. A SelectcleanI Set/offTimerI DelaYstart .'PREHEATDooR LOCKED _ __ Hold feature.
2, 3 or 4 hour Self- _ / ,,_w. _ STOP PAD-- Used
Clean time may be _ / I_ LOV_T _ , , .
........
_to clear any function
selected. _ / previously entered
i except the time of day
TIMER SET/OFF / DELAY START / OVEN, PREHEAT & DOOR LOCKED LIGHTS _ -- and minute timer. Press
PAD-- Used to set The "OVEN" light will glow each time the oven STOP to stop cooking.
turns on to maintain the set oven temperature.
PAD-- Used to set
the desired start
time for baking &
Self-Clean. May be
used with COOl(
TIME to program a
delayed baize cycle.
or cancel the minute
timer. The minute
timer does not start
or stop cooking. Also,
TIMER SET/OFF
pad is used to set
the Continuous Baize
feature.
The "PREHEAT" light will glow when the oven is
first set to operate, or if the desired temperature
is reset higher than the actual oven temperature.
The "DOOR LOCKED" light will flash when
the oven door locks and unlocks or when using
the Self=Clean cycle or when the oven door
lockout is activated. The indicator light will glow
constantly after the door locks.
Also the STOP pad is
used to activate oven
door lockout setting.
_Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat
indicator light turns OFF, your oven has reached the set temperature.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold pad. After 5 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return to normal sound operation, press and hold pad again for 5 seconds until
the control beeps once.
Tempera|ure conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press pad. " " appears in the display.
2. Press and hold the _ pad until "HI" appears in the display.
3. Press and hold _jJ pad until °F or °C appears in the display.
4. Press the _ or V pad to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
11