Control Pad Functions; Temperature Conversion - Kenmore 790.4507 Series Use And Care Manual

Control Pad Functions
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are the
same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various functions of the oven as described below.
STOP CLEAR PAD i Used to clear UPand DOWN ARROWS PADSiUsed along with CLOCK PADi FEATURE
any function previously entered the function pads to select oven temperature, Used to set the INDICATOR
except the time of day and minute cooking time, stop time (when programming an time of day. LIGHTSiThese
timer. Push STOPCLEAR to stop automatic stop time), time of day, clean time an light to show
cooking. \ minute timer, il which feature is
BAKE PADi _ \ in use.
Used to \ COOK TIME
enter the normal ', PAD i Used
....
•
\ PI3,oc
DaK,ng moae__ ".... .... i:_ i_ _i:i!!!_!"k i_ toenterthe
temnerature _:
,, . length of the
.... : baking time
BROILi Used (if equipped).
to select the
variable broil
function.
SELF CLEAN
PADi Used to_
select the self-
cleaning cycle.
• • •
Oven
• _ _t_::, • Preheat
_:_ • DoorLocked
OVEN, PREHEAT & LOCK LIGHTSi The "OVEN" light will glow each
time the oven unit turns on to maintain the set oven temperature. The
"PREHEAT" light will glow when the oven is first set to operate, or if the
desired temperature is reset higher than the actual oven temperature.
The "LOCK" light will flash until the door locks when the self-clean
cycle is in use. It glows constantly after the door locks.
_ Timer Stop '_
TIMER SET/OFF PAD
Used to set or cancel the
minute timer. The minute
timer does not start or stop
cooking.
STOPTIME
PAD i Used
to set the
desired stop
/ time for
baking. Can
be used with
BAKE TIME to
program a
delayed bake
cycle (if
equipped).
The oven can be programmed to: BAKE normally, TIME BAKE, BROIL, SELF-CLEAN
Note: The oven function will not work if the time of day clock is not set.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for
silent operation. Push and hold STOP TIME pad (_. After 7 seconds, the control will beep once. This will block the controls
from sounding when a pad is pushed. To return the sound, push and hold STOP TIME pad _'_ again for 7 seconds until 1
v
beep is heard.
Temperature Conversion
(Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push BROIL pad (_.
"- - " appears in the display.
2. Push and hold the UP ARROW _ pad until " Hl " appears in the display.
3. Push and hold BROIL pad _
until °F or °C appears in the display.
4. Push UP _or DOWN ARROW v pad to change °Fto°C or °C to °F.
5. Pushany function pad to return to normal operating mode.