Kenmore 116.21514 Use & Care Manual page 9

VIANDS
1, tnsert upper
wand into lower
wand until lock
button snaps in
place.
To remove:
Press wand lock
button and pull
wands apart.
O
-Raised
Area
j __ Upper
m I I Wand
J Lack
IU _'_'I Button
-._Cord
Holder
I _ Lower
Wand
5
2. insert the plug of
the PowerMate ® cord
into the plug holder
as shown. DO NOT
force.
Raised area of the
plug must be towards
hand,
3. Secure the cord
into the cord holder
on the back of the
wand.
HANDLE
Insert wand into handle until lock button
snaps in place, Be sure hose is not tw|sted.
To remove: Press handle quick release
button and pull up on handle.
The combination brush can be stored on
the hose handle by placing on hose handle
before attaching wand.
To store: Disconnect hose from wand and
canister to prevent stress on hose during
storage. Store hose in a loosely coiled
position so the hose covering is not
stressed.