Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko WM61631W
Summary of Contents for Beko WM61631W
- Page 1 Automatic washing machine WM61631W...
- Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1 Your washing machine Additional programmes ... . 20 Special programmes ....21 Overview ......4 Temperature selection . -
Page 4: Your Washing Machine
Your washing machine Overview 1- Power cable 5- Adjustable feet 2- Top panel 6- Loading door 3- Control panel 7- Detergent drawer 4- Filter cap 8- Drain hose... -
Page 5: Technical Specifications
Technical specifications Models WMB61631W Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) Electrical input (V/Hz) 230 V / 50Hz Total current (A) Total power (W) 2200 Spin speed (rpm max.) 1600 1.00 Stand-by mode power (W) 0.25 Off-mode power (W) Technical specifications may be changed without prior notice to improve the quality... -
Page 6: Important Safety Instructions
Important safety instructions • Never open the loading door or This section contains safety instructions remove the filter while there is still that will help protect from risk of personal water in the drum. Otherwise, risk of injury or property damage. Failure to flooding and injury from hot water will follow these instructions shall void any occur. - Page 7 let them to tamper with the product. Use child lock to prevent children from intervening with the product. • Do not forget to close the loading door when leaving the room where the product is located. • Store all detergents and additives in a safe place away from the reach of the children.
-
Page 8: Installation
Installation Refer to the nearest Authorised Service Removing packaging Agent for installation of the product. To reinforcement make the product ready for use, review Tilt the machine backwards to remove the information in the user manual and the packaging reinforcement. Remove the make sure that the electricity, tap water packaging reinforcement by pulling the supply and water drainage systems are... -
Page 9: Connecting Water Supply
will get damaged or the product will switch to protection mode and will not operate. Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry. 1. Connect the special hoses supplied with the product to the water inlets 3. -
Page 10: Connecting To The Drain
Connecting to the drain an appropriate clamp as not to come off and leak. • The end of the drain hose must be Adjusting the feet directly connected to the wastewater drain or to the washbasin. In order to ensure that the product Your house will be flooded if the operates more silent and vibration- hose comes out of its housing... -
Page 11: Electrical Requirements
for any damages that will arise when the fuse cover has been fitted. Colour of the product is used without grounding in replacement fuse cover must be the same accordance with the local regulations. colour as that visible on the pin face of the plug. -
Page 12: First Use
First use 2. Remove water drain and water supply connections. Before starting to use the product, make 3. Drain the remaining water in the sure that all preparations are made in product completely; see, "Draining accordance with the instructions in remaining water and cleaning the sections "Important safety instructions"... -
Page 13: Preparation
Preparation Things to be done for energy saving Following information will help you use the product in an ecological and energy- Wash with sensitive, Washing water efficient manner. .short programmes temperature • Operate the product in the highest capacity allowed by the programme you have selected, but do not overload;... -
Page 14: Correct Load Capacity
Correct load capacity The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired. The machine automatically adjusts the amount of water according to the weight of the loaded laundry. Follow the information in the “Programme and consumption table”. -
Page 15: Using Detergent And Softener
Using detergent and softener • Wash your delicate clothes only with special detergents (liquid detergent, Detergent Drawer wool shampoo, etc.) used solely for The detergent drawer is composed of delicate clothes. three compartments: • When washing dark coloured clothes - (I) for prewash and quilts, it is recommended to use - (II) for main wash liquid detergent. - Page 16 putting in the detergent cup. Tablet detergents may leave residues in the detergent compartment. If you encounter such a case, place the tablet detergent between the laundry, close to the lower part of the drum in future washings. Use the tablet or gel detergent without selecting the prewash function.
- Page 17 • Oxygen based bleaches can be used together with detergents; however, if its thickness is not the same with the detergent, put the detergent first into the compartment nr. “II” in the detergent drawer and wait until the detergent flows while the machine is taking in water.
-
Page 18: Tips For Efficient Washing
Tips for efficient washing Clothes Light colours and Delicates/ Colors Dark colors whites Woolens/Silks (Recommended (Recommended (Recommended (Recommended temperature temperature temperature range temperature range range based range based based on soiling based on soiling level: on soiling level: on soiling level: level: 40-90C) cold-40C) cold-40C) -
Page 19: Operating The Product
Operating the product Control panel 1 - Programme Selection knob (Uppermost position On / Off) 2 - Display 3 - Delayed Start button 4 - Programme Follow-up indicator 5 - Start / Pause button 6 - Auxiliary Function buttons 7 - Spin Speed Adjustment button 8 - Temperature Adjustment button Preparing the machine Heavily soiled white cottons... -
Page 20: Main Programmes
2. Select the desired programme with for woolens. the Programme Selection button. Additional programmes Programmes are limited with the For special cases, additional programmes highest spin speed appropriate for are available in the machine. that particular type of fabric. Additional programmes may differ When selecting a programme, always according to the model of the consider the type of fabric, colour,... -
Page 21: Special Programmes
sorting them. explanations of these options. If the programme has not reached the Special programmes spinning step, you can change the For specific applications, select any of the speed without switching the machine following programmes. to Pause mode. • Rinse Use this programme when you want to rinse or starch separately. -
Page 22: Programme And Consumption Table
Programme and consumption table Auxiliary functions Selectable Programme temperature range °C Cottons 2.48 1600 • • • • • • • Cold-90 Cottons 1.50 1600 • • • • • • • Cold-90 Cottons 0.96 1600 • • • • •... -
Page 23: Auxiliary Function Selection
Auxiliary function selection one already made after the main wash. Thus, the risk for sensitive skins (babies, Select the desired auxiliary functions allergic skins, etc.) to be effected by before starting the programme. the minimal detergent remnants on the Furthermore, you may also select or laundry can be reduced. -
Page 24: Starting The Programme
1. Open the loading door, place the machine will switch to Pause mode laundry and put detergent, etc. and the illumination level of the temperature, speed and loading 2. Select the washing programme, door indicator lights will decrease. temperature, spin speed and, if Other indicator lights and indicators required, the auxiliary functions. -
Page 25: Progress Of Programme
Changing the selections after In addition to the method above, to programme has started deactivate the Child Lock, switch the Switching the machine to pause Programme Selection knob to On mode / Off position when no programme is running, and select another Press the Start / Pause button to switch programme. -
Page 26: End Of Programme
Pump function is activated for 1-2 minutes regardless of the programme step, and whether there is water in the machine or not. After this period, your machine will be ready to start with the first step of the new programme. Depending on the step where the programme was canceled in, you may have to put detergent and softener... -
Page 27: Maintenance And Cleaning
Maintenance and cleaning Service life of the product extends and (compartment nr. II). If the anti-limescale frequently faced problems decrease if is in tablet form, put only one tablet into cleaned at regular intervals. compartment nr. II. Dry the inside of the bellow with a clean piece of cloth after the Cleaning the detergent drawer programme has come to an end. -
Page 28: Draining Remaining Water And Cleaning The Pump Filter
cleaned as they do get dirty. Temperature of the water inside the machine may rise up to 90 ºC. To avoid burning risk, filter must be cleaned after the water in the machine cools down. 2. Open the filter cap. If the filter cap is composed of two pieces, press the tab on the filter cap downwards and pull the piece out... - Page 29 while installing it into its housing. Seat the filter into its place completely. Otherwise, water may leak from the filter cap. 6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to a.
-
Page 30: Troubleshooting
Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel button for 3 seconds to reset the machine to factory settings. (See "Canceling the programme") Water in the machine. - Page 31 Loading door cannot be opened. • Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or Spin programme. • Machine is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.
- Page 32 Machine does not switch to spinning step. • There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum. Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment.
- Page 33 Colour of the clothes faded. • Excessive laundry was loaded in. >>> Do not load the machine in excess. • Detergent in use is damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. •...
- Page 34 Detergent residue in the detergent drawer. • Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent. • Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. •...
- Page 35 Foam is overflowing from the detergent drawer. • Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”.
-
Page 36: Guarantee
Republic of Ireland. items. • The guarantee is applicable only to • The labour costs of a Beko approved new products and is not transferable if repairer to carry out the repair. the product is resold. • Beko disclaims any liability for What is not covered? incidental or consequential damages. -
Page 37: Service
Should you experience any difficulty in require attention under guarantee. obtaining service please contact the Beko Customer Help-Line. You should also complete the details Tel: 0845 600 4911 below;...