Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Beko WM 6112W
Summary of Contents for Beko WM 6112W
- Page 1 WM 6112W...
-
Page 2: Important Instructions For Safety And Environment
1 Important instructions for safety and person (preferably an electrician) or someone designated by the importer in order to avoid possible risks. environment 1.2 Intended use This section contains safety instructions that will help protect • This product has been designed for domestic use. It is not from risk of personal injury or property damage. Failure to suitable for commercial use and it must not be used out follow these instructions shall void any warranty. of its intended use. -
Page 3: Appropriate Installation Location
2 Installation 2. Remove transportation safety bolts by turning them gently. Refer to the nearest Authorised Service Agent for installation 3. Attach the plastic covers supplied in the User Manual bag of the product. To make the product ready for use, review into the holes on the rear panel. (P) the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out. Preparation of the location and electrical, tap water and waste water installations at the place of installation is Keep the transportation safety bolts in a safe place to under customer's responsibility. -
Page 4: Connecting To The Drain
points. If any leaks occur, turn off the tap and remove the 1. Loosen the lock nuts on the feet by hand. nut. Retighten the nut carefully after checking the seal. To 2. Adjust the feet until the product stands level and prevent water leakages and damages caused by them, balanced. keep the taps closed when the machine is not in use. 3. Tighten all lock nuts again by hand. 2.5 Connecting to the drain • The end of the drain hose must be directly connected to the wastewater drain or to the washbasin. Your house will be flooded if the hose comes warning out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the Do not use any tools to loosen the lock nuts. - Page 5 3 Preparation 3.4 Initial use Before starting to use the product, make sure that all 3.1 Sorting the laundry preparations are made in accordance with the instructions in • Sort laundry according to type of fabric, colour, and sections “Important safety instructions” and “Installation”. degree of soiling and allowable water temperature. To prepare the product for washing laundry, perform first • Always obey the instructions given on the garment tags. operation in Drum Cleaning programme. If your product 3.2 Preparing laundry for washing is not equipped with Drum Cleaning programme, perform the Initial Use procedure in accordance with the methods • Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will described under “5.2 Cleaning the loading door and the damage the machine. Remove the metal pieces or wash drum” section of the user manual.
-
Page 6: Using Detergent And Softener
Adjusting detergent amount The loading door is locked while a programme is running. The amount of washing detergent to be used depends The door can only be opened a while after the programme on the amount of laundry, the degree of soiling and water comes to an end. hardness. In case of misplacing the laundry, noise and warning • Do not use amounts exceeding the dosage quantities vibration problems may occur in the machine. recommended on the detergent package to avoid 3.7 Using detergent and softener problems of excessive foam, poor rinsing, financial savings and finally, environmental protection. When using detergent, softener, starch, fabric dye, bleach • Use lesser detergent for small amounts or lightly soiled or limescale remover read the manufacturer's instructions... -
Page 7: Tips For Efficient Washing
• Use just a little amount (approx. 50 ml) of bleaching agent Using starch and rinse the clothes very well as it causes skin irritation. • Add liquid starch, powder starch or the fabric dye into the Do not pour the bleaching agent onto the clothes and do softener compartment. not use it for coloured clothes. • Do not use softener and starch together in a washing • When using oxygen based bleaches, select a programme cycle. that washes at a lower temperature. • Wipe the inside of the machine with a damp and clean • Oxygen based bleaches can be used together with cloth after using starch. -
Page 8: Operating The Product
4 Operating the product 4.1 Control panel 1 - Programme Selection knob (Uppermost position On/Off) 5 - Auxiliary Function buttons 2 - Programme Follow-up indicator 6 - Delayed Start button (in some models) 3 - Temperature Adjustment button 7 - Start / Pause button 4 - Spin Speed adjustment button 8 / 20 EN Washing Machine / User’s Manual... -
Page 9: Preparing The Machine
4.2 Preparing the machine 4.5 Additional programmes Make sure that the hoses are connected tightly. Plug in your For special cases, additional programmes are available in machine. Turn the tap on completely. Place the laundry in the the machine. machine. Add detergent and fabric softener. Additional programmes may differ according to the 4.3 Programme selection model of the machine. Select the programme suitable for the type, quantity and soiling degree of the laundry in accordance with the • Cottons Eco "Programme and consumption table" and the temperature You may wash your normally soiled durable cotton and table below. linen laundry in this programme with the highest energy and water saving compared to all other wash programmes Heavily soiled white cottons and linens. (coffee table 90˚C... -
Page 10: Special Programmes
4.6 Special programmes For specific applications, select any of the following programmes. • Rinse Use this programme when you want to rinse or starch separately. • Spin+Drain Use this programme to apply an additional spin cycle for your laundry or to drain the water in the machine. Before selecting this programme, select the desired spin speed and press Start / Pause button. First, the machine will drain the water inside of it. Then, it will spin the laundry with the set spin speed and drain the water coming out of them. If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select the No Spin function with the help of Spin Speed Adjustment button. Press Start / Pause button. - Page 11 ** “Cotton eco 40°C and Cotton eco 60°C are standard cycles.” These cycles are known as ‘40°C cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the symbols on the panel. The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
-
Page 12: Auxiliary Function Selection
4.10 Auxiliary function selection prevent them from getting wrinkled when there is no water in the machine. Press Start / Pause button after this process Use the following auxiliary functions according to your if you want to drain the water without spinning your laundry. daily needs. Select the desired auxiliary functions before Programme will resume and complete after draining the starting the programme. Furthermore, you may also select water. or cancel auxiliary functions that are suitable to the running If you want to spin the laundry held in water, adjust the Spin programme without pressing the Start / Pause button when Speed and press Start / Pause button. the machine is operating. For this, the machine must be in The programme resumes. Water is drained, laundry is spun a step before the auxiliary function you are going to select and the programme is completed. or cancel. -
Page 13: Progress Of Programme
the Loading Door while the Loading Door light is off, you If the Programme Selection knob is turned when the have to cancel the current programme; see "Canceling the Child Lock is active, “Con” appears on the display. programme". The Child Lock does not allow any change in the programmes and the selected temperature, speed and Changing the selections after auxiliary functions. programme has started Even if another programme is selected with the Switching the machine to pause mode Programme Selection knob while the Child Lock is Press the Start / Pause button to switch the machine to active, previously selected programme will continue pause mode while a programme is running. The light of running. -
Page 14: Maintenance And Cleaning
5 Maintenance and cleaning Repeat Drum Cleaning process in every 2 months. Service life of the product extends and frequently faced problems decrease if cleaned at regular intervals. 5.1 Cleaning the detergent drawer Use an anti-limescale suitable for the washing machines. Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent After every washing make sure that no foreign substance is accumulation of powder detergent in time. left in the drum. 1. Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine. If the holes on the bellow shown in the figure is blocked, If more than normal amount of water and softener open the holes using a toothpick. -
Page 15: Draining Remaining Water And Cleaning The Pump Filter
5.5 Draining remaining water and Discharging the water when the product has an emergency draining hose: cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend. If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter. a. Pull the emergency draining hose out from its seat In addition, prior to transporting the machine (e.g., when b. Place a large container at the end of the hose. Drain the moving to another house) and in case of freezing of the water into the container by pulling out the plug at the end water, water may have to be drained completely. -
Page 17: Troubleshooting
7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme") Water in the machine. • Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine. -
Page 18: Product Fiche
PRODUCT FICHE Complying Commission Delegated Regulation (EU) No 1061/201 Supplier name or trademark Beko Model name WM 6112W Rated capacity (kg) Energy efficiency class Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 1.014... - Page 19 19 / 20 EN Washing Machine / User’s Manual...
- Page 20 20 / 20 EN Washing Machine / User’s Manual...