Kenmore 16 Instructions Manual page 32

DOUBLE NEEDLE
STITCHING
All decorative patterns are possible with double
needle. Before starting any stitching operation,
check needle drop by turning the handwheel
manually. Needle should enter fabric without
touching the presser foot or needle plate. The
stitch width control must not be advanced beyond
3½ setting.
TURNING A CORNER
To turn a square corner when stitching with a
double needle, stop stitching with the longer needle
tip just piercing the fabric. Raise the presser foot,
shift fabric half the turn, lower presser foot and
take one stitch. Raise the presser foot again,
complete the turn, and begin stitching in the new
direction.
31
1
2,;