Multiple Zigzag Stitch; Seam Finishing; Mending - Kenmore 385.19106 Owner's Manual

Multiple Zigzag Stitch
Machine setting
_i_ Stitch selector: :-_"
:_:
_2_ Needle thread tension: 3 - 6
_3_ Presser foot: Zigzag foot: A
f
• Seam finishing
This stitch is used to finish the seam allowance on
synthetics and other fabrics that tend to pucker, The stitch
is also excellent for darning and mending tears.
Place your fabric to allow a 5/8" (1.5 cm) seam, Trim
excess close to stitching. Be careful not to cut the stitches.
• Mending
Position the tear under the needle so that the stitch
catches both sides.
/
<'-7
f
46