Install The Cooktop Backsplash Accessory - GE Monogram ZGU48N4G Installation Instructions Manual

Installation
iNSTALL 9" or 12" HiGH BACKSPLASH
• Install and level the range or cool{top according to the
installation instructions.
Remove the backsplash packaging. Select the back, wall
mount panel with mounting screw slots.
Marl{ a horizontal line on the wall, 1/8" above the
range/cool{top backguard.
Use wood screws or fasteners (not supplied) to secure
the back section to the wall. Slide the panel up or down
to provide the 1/8" gap between the top of the
range/cool{top and the bottom of the backsplash.
This 1/8" gap allows the appearance or front section
to overlap the mounted rear panel.
Secure the appearance panel to the mounted back
section with the #8 self-tapping screws provided.
Install 3 screws on each side and 5 across the top.
Backl
Supplied \
#8 Screws _,
Slotsfor Vertical \
Adjustment \
Backsection
1/8t
Frontsection ,
Back_
section
iNSTALL 22" HiGH BACKSPLASH
Install and level the range or cooktop according to the
installation instructions.
Remove the backsplash packaging. Select the back, wall
mount panel with mounting screw slots.
• Marl{ a horizontal line on the wall, 1/8" above the
range/cool{top backguard.
Use wood screws or fasteners (not supplied)to secure
the back section to the wall. Slide the panel up or down
to provide the 1/8" gap between the top of the
range/cool{top and the bottom of the backsplash.
This 1/8" gap allows the appearance or front section
to overlap the mounted rear panel.
Attach the shelf to the front section of the backsplash
using screws and nuts supplied.
Secure the appearance panel to the mounted back
section with the #8 self-tapping screws provided.
Install 3 screws on each side and 5 across the top.
Frontsection
Back \
Supplied.......... \
#8 Screws \ section
Supplied_
#8 Screws
Bac!
section "_.
ti °"
gackguarld/_
I _-_-'_-_--_-_
Slotsfor
Vertical
Adjustment
Holes_
WARNING:
The back section must be securely fastened to
the wall. Failure to do so could cause damage or
personal injury. Maximum shelf weight capability
is 10 Ibs.
AVERTISSEMENT :
La section arriere doit _tre fix_e solidement
sur lemur. Le d_faut de proc_der ainsi peut
causer des dommages materiels ou des I_sions
corporelles. La capacit_ de charge maximale
de I'_tag_re est de 4,5 kg (10 Ibs ).
11