Install The Cooktop Backsplash Accessory - GE Monogram ZGU48N4G Installation Instructions Manual

Hide thumbs Also See for Monogram ZGU48N4G:
Table of Contents

Advertisement

Installation
INSTALL 9" or 12" HIGH BACKSPLASH
• Install and level the range or cooktop according to the
installation instructions.
• Remove the backsplash packaging. Select the back, wall
mount panel with mounting screw slots.
• Mark a horizontal line on the wall, 1/8" above the
range/cooktop backguard.
• Use wood screws or fasteners (not supplied) to secure
the back section to the wall. Slide the panel up or down
to provide the 1/8" gap between the top of the
range/cooktop and the bottom of the backsplash.
This 1/8" gap allows the appearance or front section
to overlap the mounted rear panel.
• Secure the appearance panel to the mounted back
section with the #8 self-tapping screws provided.
Install 3 screws on each side and 5 across the top.
Supplied
\
Slotsfar Verticat_
Adjustment
Sacksection
1/8'L
Sack,
Front section
INSTALL 22" HIGH BACKSPLASH
• Install and level the range or cooktop according to the
installation instructions.
• Remove the backsplash packaging. Select the back, wall
mount panel with mounting screw slots.
• Mark a horizontal line on the wall, 1/8" above the
range/cooktop backguard.
• Use wood screws or fasteners (not supplied) to secure
the back section to the wall. Slide the panel up or down
to provide the I/8" gap between the top of the
range/cooktop and the bottom of the backsplash.
This 1/8" gap allows the appearance or front section
to overlap the mounted rear panel.
• Attach the shelf to the front section of the backsplash
using screws and nuts supplied.
• Secure the appearance panel to the mounted back
section with the #8 self-tapping screws provided.
Install 3 screws on each side and 5 across the top.
Front section _,
S_pplied --
Sack
\
#8 Screws
section"
S*ipplied
_
#8 Screws_,
Back
section
lip
Backguard J
Slotsfor
O@
Vertical
Adjustment
.q-
WARNING:
The back section must be securely fastened to
the wall. Failure to do so could cause damage or
personal injury. Maximum shelf weight capability
is 10 Ibs.
AVERTISSEMENT
."
La section arri0re doit 0tre fix0e solidement
sur le mur. Le d0faut de proc0der ainsi peut
causer des dommages mat0riels ou des 10sions
corporelles. La capacitO de charge maximale
de I'0tagOre est de 4,5 kg (10 Ibs ).
11

Advertisement

Table of Contents
loading

Table of Contents