Rapid Advance - Electrolux Washer-extractors WS4250H Instruction Handbook Manual

INSTRUCTION
HANDBOOK

Rapid advance

991 NORMAL 95 °C STD
PROGRAM STEP : MAIN WASH
STEP TIME : 720 SEC
SET TEMPERATURE : 85 °C
ACTUAL TEMPERATURE : 21 °C
REMAINING TIME : 70 MIN
DRUM SPEED : 48 RPM
RAPID ADVANCE :
PAUSE
SELECT
STEP TIME
SET TEMPERATURE
RAPID ADVANCE
PAUSE
MANUAL FUNCTIONS
TEXT
SELECT NEW WASH PROGRAM
CHANGE °F/°C
AUTO RESTART
SELECT
991 NORMAL 95 °C STD
RAPID ADVANCE
PREWASH 1
EXTRACT 1
MAIN WASH 1
EXTRACT 2
RINSE 1
SELECT
PREWASH
EXTRACT
MAIN WASH
EXTRACT
RINSE
EXTRACT
RINSE
EXTRACT
RINSE
EXTRACT
END OF PROGRAM
SELECT
11. Machine
operation
During program operation the
display will look this (see section
1
« To start the wash program »).
Check that « RAPID
ADVANCE » is highlighted.
If it is not highlighted :
Press or one or more
times to highlight « RAPID
ADVANCE ».
Press SELECT.
Press or one or more
times to highlight the program
step you wish to advance to.
1
1
1
2
1
3
2
4
3
5
Press SELECT.
01201138
Notice
To terminate a program before it has fi nished
•
Select RAPID ADVANCE and press SELECT.
Advance to "END OF PROGRAM" and press SE-
LECT.
•
Wait until "THE DOOR IS OPEN" appears on the
display.
•
Now the door can be opened.
Rapid advance works in both directions
Rapid advance works in both directions, using (
and ( ).
Using rapid advance to move forwards allows you to
skip one or more program steps. Using rapid advance
backwards allows you to repeat one or more program
steps.
Automatic return to normal display
Once you have selected any of the functions below,
you must make any changes required within 20 sec-
onds. If no further keys are pressed within 20 seconds,
the display will revert automatically to its normal ap-
pearance during a wash program.
0107 14
11
Date Page
)