Electrical Connections - GE PHP960 Instalation Instructions

Installation Instructions
ELECTRICAL CONNECTIONS
NEW CONSTRUCTION AND BRANCH
CIRCUIT CONNECTION
.4L W iAumR iNu ImNhGo uslemp[o pg rtc O2oppCet_ o n
eads can result in an electrical hazard or III
re. Use only connectors designed for III
oining copper to aluminum and follow the Ill
anufacturer's recommended procedure Ill
osely.
When making the wire
connections, use the
entire length of conduit
provided. The conduit
must not be shortened
(unless required bu local
codes). The conduit length
is 4 ft. With the cooktop in
place, open the front of
the cabinet door. Insert
the wires from the conduit
through the opening of
&-,
J16"
Install junction box
so that it can be
reached through
the front of the
cabinet.
the junction box. The conduit strain relief clamp
must be securely attached to the junction box and
the flexible conduit must be securelu attached to
the clamp.
• When installing in new construction, or
• When installing in a mobile home, or
• When installing in a recreational vehicle, or
• When local codes do not permit grounding
through neutral:
a. Insert conduit through strain relief and tighten.
b. Attach the appliance grounding lead (green or
bare copper) in accordance with local codes. If
the residence grounding conductor is
aluminum, see WARNING.
Strain Relief _ Ground Wire
-- Junction Box Cover
THREE-CONDUCTOR BRANCH CIRCUIT
CONNECTION
When connecting to a three-conductor branch
circuit, if local codes permit:
a. Connect the bare cooktop ground conductor
with the crimped ground (green)lead to the
branch circuit ground (green) using a wire
nut.
round and
_-_ Wires
Neutral
Junction Box Cover
b°
C°
Connect the cooktop red lead to the branch
circuit red lead in accordance with local
codes, using a wire nut.
Connect the cooktop black lead to the
branch circuit black lead in accordance with
local codes, using a wire nut. If the residence
red, black or white leads are aluminum
conductors, see WARNING.
d. Install Junction Box Cover.