Back to Contents Page
Power Management Controller Board - Hall
Dell™ XPS™ M1730 Service Manual
CAUTION:
Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1. Follow the procedures in
Before You
2. Remove the palm rest (see
3. Remove the card with internal bluetooth
4. Remove the consumer infrared board (see
5. Remove the two screws that secure the power management controller to the computer base.
1
screws (2)
6. Lift the power management controller to disconnect it from the system board.
Back to Contents Page
Begin.
Palm
Rest).
®
wireless technology (see
Removing the Consumer Infrared
2
connector
Removing the Card With Bluetooth® Wireless
Board).
Technology).