Preliminary Checks; Controls After Transport; Installing The Appliance; Connecting The Appliance - DeLonghi Fully Automatic Coffee Center Machine ESAM6700 Instructions For Use Manual

coffee.
C5. oK icon: to enable and confirm the selected
function.
C6. icon: to rinse or deliver hot water.
C7. hot mILK icon: to deliver a cup of steamed
milk.
C8. ItALIAn mACChIAto icon: to deliver a
shot of espresso with a small amount of
foam on top.
C9. LonG icon: to deliver one cup of
C10. CAppuCCIno icon:
cappuccino.
C11. LAttE icon: to deliver a latte.
C12. p icon: to access the programming menu.
C13. ESC icon: to exit the selected function in
the menu.
C14. icon: to select the coffee's strength.
C15. icon: to select the coffee size.
C16. icon: to scroll backwards through the
programming menu.
Information : A light touch is enough to
activate the icon.

prELImInAry ChECKS

Controls after transport

After removing the packaging, make sure the
product is complete and undamaged and that all
accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Service.

Installing the appliance

to deliver a
When you install the appliance, you should follow
the safety warnings below:
• The appliance gives off heat. After positioning
• Water penetrating the appliance could cause
• The appliance could be damaged if the
• Arrange the power cable in such a way that

Connecting the appliance

supply voltage corresponds to the value
indicated on the rating plate on the bottom of the
appliance.
Connect the appliance to an efficiently earthed
and correctly installed outlet with a minimum
current rating of 12A only. If the power outlet
does not match the plug on the appliance, have
the outlet replaced with a suitable type by a
qualified professional.
10
Important!
the appliance on the work top, leave a space
of at least 1 in (3 cm) between the appliance
and the side and rear walls and at least 6 in
(15 cm) above the coffee maker.
damage. Do not place the appliance near
taps or sinks.
water it contains freezes. Do not install the
appliance in a room where the temperature
could drop below freezing point.
it cannot be damaged by sharp edges or
contact with hot surfaces (e.g. electric hot
plates).
Important! Check that the power outlet