CONTENTS Programming the quantities of coffee and milk in the cup ..........16 INTRODUCTION ........... 8 Symbols used in these instructions ....8 HEATING WATER ..........16 Letters in brackets ........... 8 Preparation ............ 16 Troubleshooting and repairs ......8 Changing the quantity ........
INTRODUCTION SAFETY Thank you for choosing the ESAM 6620 automatic Fundamental safety warnings coffee and cappuccino maker. We hope you enjoy using your new appliance. Danger! Take a few minutes to read these instructions. This is an electrical appliance and may cause This will avoid all risks and damage to the electric shock.
DESIGNATED USE DESCRIPTION OF THE APPLIANCE This appliance is designed and made to prepare Description of the appliance coffee and heat drinks. (page 3 - All other use is considered improper. A1. Grinding adjustment knob This appliance is not suitable for commercial A2.
C8. LATTE MACCHIATO button: delivers 1 plate on the bottom of the appliance. macchiato (or frothed milk if pressed twice Connect the appliance to an efficiently earthed consecutively) and correctly installed socket with a minimum C9. CAPPUCCINO button: delivers current rating of 10A only. cappuccino (or frothed milk if pressed If the power socket does not match the plug on twice consecutively)
Please note: appliance in the 0 position (fig. 6). When using the appliance for the first time, CHANGING THE MENU SETTINGS you need to make 4-5 cups of coffee or 4-5 cappuccinos before the appliance starts to give Press the P button to access the programming menu. satisfactory results.
Activating auto-start change the number of hours the appliance SET button again and “AUTO- remains on. START NO” is displayed. OK button to confirm. button (corresponding to P button (corresponding to the the SET symbol flashing on the display) to ESC symbol flashing on the display) to exit modify the function (the appliance displays programming mode or...
parameters. However, if after making the first few coffees you find that delivery is either too fast or too slow (a Beep and displays the message “READY”. drop at a time), this can be corrected by adjusting the grinding adjustment knob (fig. 7). MAKING COFFEE Important! Selecting the coffee taste...
MAKING DRINKS WITH MILK Once the coffee has been made, the appliance is ready to use again. Filling and attaching the milk container Please note: 1. Turn the lid of the milk container clockwise until it becomes noticeably difficult to turn, can be interrupted at any moment by pressing then remove (fig.
Please note: Cleaning the milk container after use If during delivery you want to stop making milk Important: Danger of burns or coffee, press the CAPPUCCINO button. When cleaning the internal tubes of the milk Making macchiato container, a little hot water leaks out of the frothed After attaching the milk container, position milk tube (B5).
CLEANING The quantities of coffee and milk for macchiato and caffelatte can also be programmed. Cleaning the coffee maker HEATING WATER The following parts of the machine must be cleaned regularly: Preparation coffee grounds container (A17), drip tray (A15), Important! Danger of burns. water tank (A12), Never leave the machine unsupervised while coffee spouts (A19) and hot water nozzle...
If this is not done, when you make the next from the mains power supply. coffees, the grounds container may fill up more Never immerse the coffee maker in water. than expected and clog the machine. Cleaning the inside of the coffee maker Cleaning the drip tray 1.
Please note: DESCALE If the infuser is difficult to Descale the machine when the message insert, you must first adapt “DESCALE!” flashes on the display. it to the right dimensions Important! by pressing it forcefully Descaler contains acids which may irritate the from the bottom and top skin and eyes.
performs a series of rinses and pauses to Set water hardness remove limescale deposits from inside the 1. Press the P button to enter the menu. machine. 2. Press the button (corresponding to After about 30 minutes, the message “RINSING... symbol flashing on the display) FILL TANK!”...
DISPOSAL Recommendations for the correct disposal of the product in compliance with the 2002/96/CE Eu- ropean Directive. The product must not be disposed of as urban waste at the end of its working life. It must be taken to appropriate local authority separate waste collection centres or to dealers providing this service.
DISPLAYED MESSAGES MESSAGE MEANING WHAT TO DO FILL TANK positioned incorrectly. insert it correctly, pushing it as far as it will go. GROUND TOO FINE ADJUST MILL INSERT WATER SPOUT AND PRESS OK coffee is delivered too slowly. the grinding adjustment knob one click clockwise towards “7”...
GENERAL ALARM dirty.. described in the section “ Cleaning the inside of the coffee maker”. If the message is still displayed after cleaning, contact Customer Services. PRESS CLEAN BUTTON and the tubes inside the milk it down for at least 8 seconds. The container must be cleaned.
The milk is not well frothed. adjusted. in the section on preparing drinks with milk. described in the section “Cleaning the milk container”. The milk contains bubbles or squirts out of the milk spout. not semi-skimmed. semi-skimmed milk at refrigerator temperature (about 5°C).
Need help?
Do you have a question about the ESAM6620 and is the answer not in the manual?
Questions and answers