Product Features and Precautions for Use
• Water, Dust, and ShockResistance
']) The camera
complies
with JIS Class 8 water
resistance
and JIS Class 6 (IP68) dust resistance
standards, and has passed FUJlFILM drop tests (drop height:
1.5 m/4.9 ft.; impact
surface: ply-
wood, thickness 5 cm/2.0 in.) compliant
with MIbSTD 81 OF Method
516.5: Shock.These
results
were obtained
through
in-house
testing
and are not a blanket
guarantee
of water resistance
or invulnerability
to damage
or destruction.The
accessories
supplied
with the camera are not
water resistant.
• Before Use
1 Inspect
the water-resistant
seal and adjacent
surfaces and remove
any dust, sand, or other foreign
matter using a soft, dry cloth.
'J) Have the water-resistant
seal replaced
if it is deformed
or other-
wise damaged
(note that a fee is charged
for this service; contact
your retailer or a FUJlFILM-authorized
repair technician
for more
information).
Failure to replace the seal could
result in leaks and
damage
to the camera.
2
Holding
the battery-chamber
cover closed against the cam-
;
era body ((]])), rotate the latch until it clicks into place ((_)),
'_:
indicating
that the cover is secure.
3 Check that the cover is secure by rotating the latch in the opposite direction and confirming
that the cover does not open.
xi