Table of Contents
Advertisement
Product Features and Precautions for Use
■ ■ Water, Dust, and Shock Resistance
Water, Dust, and Shock Resistance
QThe camera complies with JIS Class 8 water resistance and JIS Class 6 (IP68)
dust resistance standards, and has passed Fujifi lm drop tests (drop height:
1.80 m/5.9 ft.; impact surface: plywood, thickness 5 cm/2.0 in.) compliant with
MIL-STD 810F Method 516.5: Shock. These results were obtained through in-
house testing and are not a blanket guarantee of water resistance or invulner-
ability to damage or destruction. The accessories supplied with the camera are
not water resistant.
■ ■ Before Use
Before Use
Inspect the water-resistant seal and adjacent sur-
1
faces and remove any dust, sand, or other foreign
matter using a soft, dry cloth.
QHave the water-resistant seal replaced if it is deformed or otherwise damaged
(note that a fee is charged for this service; contact your retailer or a Fujifi lm-au-
thorized repair technician for more information). Failure to replace the seal
could result in leaks and damage to the camera.
2
Holding the battery-chamber cover closed
against the camera body (
latch until it clicks into place (
ing that the cover is secure.
3
Check that the cover is secure by rotating the latch in the opposite direction
and confi rming that the cover does not open.
A
), rotate the
B
), indicat-
1
xiii
Advertisement
Table of Contents
