Table of Contents
Advertisement
4 Close and latch the battery-chamber
cover,
Holding the battery-chamber
cover closed
against the camera body ((_), rotate the
latch until it clicks into place ((_), indicating
that the cover is secure.
(l) Before closing the cover, confirm that there is
no dust, sand, or other foreign matter on tile
water-resistant sealor adjacent surfaces.
(l) When closing the battery-chamber cover, do not subject it to excessive hori-
zontal forces. Failureto observe this precaution could causetile water-resistant
seal to become misaligned, allowing water into the camera.
(l) Check that tile cover is secure by rotating the latch in tile opposite direction
and confirming that tile cover does not open.
Make surethat the strap is not caught in the cover and that the
....
latch is closed.
• Correct
The/otch is c/osed.
l
lncorrect
The Iotch is open.
10
:: t
Advertisement
Table of Contents
