Table of Contents
Advertisement
_ging
the Battery
The battery is not charged at shipment.
Charge the battery before use. The
camera charges the battery internally.
Turn the camera off and connect the camera
to the supplied AC power adapter using the
supplied USB cable. Then plug the AC power
adapter into an indoor power outlet.
(!>Be sure the connectors are in tile correct orienta-
tion and then insert them fully.
_® TheSelf-timer L amp
The self-timer lamp shows battery charge status asfollows:
Self-timer l amp
On
Blinks
Battery status
Battery charging.
Battery fault.
Charging
complete.
off
Can not charge.
Action
See page 95.
Unplug
the AC power adapter
from the power
out-
let and reinsert the battery in the correct orientation
(95).
Tile camera operates in external power mode if tile camera is turned on while
plugged into AC power.
(l_The battery will not charge while the camera is on.
14
:: t
Advertisement
Table of Contents
