Table of Contents
Advertisement
_r a{i t <111 _e_1_.
es
_!_yl(i
_:_i'ec_M._tioiqs
_oi"
Use
• After Use
Perform the following
steps after using the camera underwater
or in locations
where foreign
matter might adhere
to the camera body.
1 Securely close the battery-chamber
cover and rinse the camera un-
der the tap or leave it in a basin of fresh water for about ten minutes.
2
Remove water from the camera with a soft, dry cloth
and leave it to dry in a well-ventilated
location
in the shade.
3
After confirming
that the camera has dried and is free of water droplets, open the battery-
chamber
cover and use a soft, dry cloth to remove any water, dust, or other foreign
matter
from the battery chamber
':!) Remove any foreign
matter from the water-resistant
seal and adjacent
surfaces.
Foreign mat-
ter could damage
the seal, lowering
water resistance.
':!) Liquid soaps, detergents,
alcohol,
and other cleansers may affect water
resistance and should
never be used.
':!) After use, remove water droplets
and foreign
matter with a dry cloth, firmly latch the battery-
chamber
cover, and soak the camera
in fresh water for about ten minutes.
Dry the camera
thoroughly
after removing
it from the water.
xiii
Advertisement
Table of Contents
