Installing The Processor - Dell Inspiron 518 Service Manual

1 processor 2 release lever
3 socket
NOTICE: When replacing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket.
7. Lift up the processor to remove it from the socket, place it aside in a safe and secure place.
Leave the release lever extended in the release position so that the socket is ready for the new processor.
Installing the Processor
NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer.
NOTICE: You must position the processor correctly in the socket to avoid permanent damage to the processor and the computer when you turn on the
computer.
1. Follow the procedures in Before You
2. Unpack the new processor, being careful not to touch the underside of the processor.
NOTICE: Socket pins are delicate. To avoid damage, ensure that the processor is aligned properly with the socket, and do not use excessive force
when you install the processor. Be careful not to touch or bend the pins on the system board.
Dell Inspiron 518
1 processor cover
3 processor
5 center cover latch
7 front alignment-notch
9 rear alignment notch
Begin.
2 tab
4 processor socket
6 release lever
8 processor pin-1 indicator