Replacing The Power Button Module - Dell XPS 8300 Service Manual

Replacing the Power Button Module

1 Follow the instructions in "Before You Begin" on page 13.
2 Align and push the power button module tabs into the slots on the top
panel.
3 Connect the power button module cable to the system board connector,
F_PANEL (see "System Board Components" on page 10).
4 Replace the top cover (see "Replacing the Top Cover" on page 59).
5 Replace the optical drive (see "Replacing the Optical Drive" on page 51).
6 Replace the front bezel (see "Replacing the Front Bezel" on page 29).
7 Replace the computer cover (see "Replacing the Computer Cover" on
page 18).
8 Connect your computer and devices to electrical outlets and turn them on.
Power Button Module
75