Fans; Chassis Fan; Removing The Chassis Fan - Dell XPS 8300 Service Manual

Hide thumbs Also See for XPS 8300:
Table of Contents

Advertisement

Fans

WARNING:
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
WARNING:
the electrical outlet before removing the cover.
WARNING:
covers, bezels, filler brackets, front-panel inserts, etc.) removed.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.

Chassis Fan

Removing the Chassis Fan

CAUTION:
Do not touch the fan blades when you are removing the chassis fan, as
this could damage the fan.
1 Follow the instructions in "Before You Begin" on page 13.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 17).
3 Disconnect the chassis fan cable from the system board connector
SYS_FAN1 (see "System Board Components" on page 10).
4 Remove the four screws that secure the chassis fan to the chassis.
5 Slide and lift the chassis fan away from the computer as shown in the
illustration.
Before working inside your computer, read the safety information
To guard against electrical shock, always unplug your computer from
Do not operate your computer with any cover(s) (including computer
14
77
Fans

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents