Daewoo DPB-280LH Service Manual page 27

Remote Controller(5)
DESCRIPTION
Signal from Remote Controller put in only Control Data Signal at Micom Terminal of Number 33, which is gotten
fid of Carrier (38KHz) from Receive Module. Signal Wave repeat third as following Fig 5-1.
But in Secondary Wave Custom Code is Reversed Face.
9ms 4.5ms 16bit 24bit 8bit 16bit
0.56ms 1.69ms 0.56ms
1.12ms 2.25ms
CUSTOM DATA CHECK
LEADER CODE
CODE CODE SUM
bit 0 bit 1
TAILER
Fig 5-2
Fig 5-1
BIT STRUCTURE
26