Replacing The Hard Drive In The Hard Drive Kit - Gateway M350 Service Manual

Replacing the hard drive in the
hard drive kit
Tools you need to complete this task:
Screws removed during this task:
2 chrome 2.5 × 6 mm
(hard drive kit)
To replace the hard drive in the hard drive kit:
1
Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in
on page 6.
2
Turn the notebook over so the bottom is facing up.
3
Remove the battery by following the instructions in
battery" on page
4
Remove the hard drive kit by following the instructions in
hard drive kit" on page
Phillips #0 screwdriver
4 chrome 3 × 3.5 mm
(hard drive)
7.
9.
www.gateway.com

Replacing the hard drive in the hard drive kit

"Preparing the notebook"
"Removing the
"Replacing the
13