Replacing The Hard Drive In The Hard Drive Kit - Gateway 450ROG Service Manual

Replacing the hard drive in the
hard drive kit
Tools you need to complete this task:
Screws removed during this task:
1 chrome 2.5 × 4 mm
(hard drive kit)
To replace the hard drive in the hard drive kit:
1
Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in
on page 6.
2
Disconnect the notebook from the optional port replicator by following
the instructions in
3
Turn the notebook over so the bottom is facing up.
4
Remove the main and optional secondary batteries by following the
instructions in
5
Remove the hard drive kit by following the instructions in
hard drive kit" on page
Phillips #0 screwdriver
2 chrome 3 × 3.5 mm
(hard drive)
"Disconnecting from the port replicator" on page
"Removing the batteries" on page
20.
www.gateway.com

Replacing the hard drive in the hard drive kit

"Preparing the notebook"
8.
7.
"Replacing the
23