Gateway 450ROG Service Manual page 26

To replace the hard drive kit:
1
Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in
on page 6.
2
Disconnect the notebook from the optional port replicator by following
the instructions in
3
Turn the notebook over so the bottom is facing up.
4
Remove the main and optional secondary batteries by following the
instructions in
5
Remove the hard drive kit screw.
"Disconnecting from the port replicator" on page
"Removing the batteries" on page
www.gateway.com
Replacing the hard drive kit
"Preparing the notebook"
8.
7.
21