On Connecting And The Settings For A Second Screen Output Device (Tv, Monitor) - Fujitsu Siemens Computers Fujitsu-Siemens PC User Manual

Deactivate the "DirectDraw acceleration" function.
... on connecting and the settings for a second screen output
device (TV, monitor)
If your PC is equipped with a second screen connection, this is
generally located on the rear of the PC; it can be that after a driver
is reinstalled the playback screen of the second output device
(monitor or TV) may be dark. This may happen if you have
downloaded and used a new driver version from the Internet. The
standard default for the driver is only configured for one screen
output device.
If you wish to use the second output, note the following from the
user manual of the 2
•
Which settings and which sockets do I need to use to run the
device as a monitor for example?
•
What television standard is for example the TV set to?
If the user manual is no longer available, contact your dealer or a
television specialist in your area.
Now proceed as follows to use the second output device:
•
Switch the PC and both screen devices off. Connect the
screen devices to the PC. Turn the screen devices on, followed
nd
device:
9