Connection; Initial Startup Of Preinstalled Software - Fujitsu Siemens Computers Fujitsu-Siemens PC User Manual

Startup

2.2 Connection

Before you switch on the computer, please connect
1. the monitor, keyboard, mouse, printer (if applicable), modem
and any other peripheral units to the PC. Please refer to the
information in the chapter "Computer Connections", as well as
the information in the "Quick Guide".
2. First connect the power cable supplied to the power socket on
the PC and then plug it into a 230 V or 115 V power socket
(plug strip). You may only operate the unit if its rated voltage
matches the local mains voltage. If your computer has a
double-voltage toggle switch, please ensure that it has been
set to the correct mains voltage for your country. The
manufacturer's default setting is 230 V.
After cabling
3. Turn on your monitor.
4. Then, if applicable, switch on the on/off switch on the back of
the computer. To start the computer, press the standby button
located on the front of the computer.
The computer is ready for operation when the green lamp / blue
ring is illuminated.

2.3 Initial startup of preinstalled software

Your computer has Microsoft®Windows XP Home Edition pre-
installed as standard. After turning on the computer, it is ready to
use. You can use the Windows operating system immediately. You
may have to make some adjustments. Follow the on-screen
instructions.
You can find the pre-installed software under: "Start / All
Programs".
10