Table of Contents
Advertisement
Supplement to the operating instructions
Supplement to the operating instructions
Guidelines and Environmental Protection
An important characteristic of our products, alongside quality and
performance, is environmental friendliness.
(I)
Protection of resources with energy-saving functions
Our units generally have energy-saving modes.
(II)
Device safety
The units meet the requirements of the low voltage directive
73/23/EEC including the amendment 93/68/EEC, certified in
accordance with EN 60950, and the directive on electromagnetic
compatibility 89/336/EEC including the amendment 93/68/EEC.
(III)
Guarantee of electromagnetic compatibility
All data and signal cables must be provided with sufficient
shielding. The minimum requirement is a Category 5 shielded
cable for 10/100 Ethernet, or Category 5e for Gigabit Ethernet. As
described in the operating instructions, all of the housing parts
must be installed.
−
Requirements for work with monitors
Our units meet the requirements set for work with monitors in
accordance with the EU screen directive 90/270/EEC for the
purposes of the EU directive 89/391/EEC.
−
Lasers
If your system has an optical drive such as a CD-ROM, CD-RW,
DVD or combined drive, the following applies:
With closed PC housings, the optical drives used correspond to
laser class 1 in accordance with IEC 60825-1. These contain light-
emitting diodes (LED) which under some circumstances may
generate a stronger light beam than laser class 1. A direct glance
into this beam, even with protective eyewear, is dangerous and
may lead to injury. Therefore, no parts of the optical drive housing
are to be removed.
A-2
Hide quick links:
Advertisement
Table of Contents
