Starter Anti-Grind Circuitry; Diagnostics; Arming Diagnostics - Clifford Ultramax XL-4500 Owner's Manual

Table of Contents

Starter Anti-Grind Circuitry

Whenever the vehicle is remote started, advanced anti-grind circuitry

will prevent the starter from engaging, even if the key is turned to

the start position. This prevents damage to the starter motor if the

key is turned to the start position during remote start operation.

NOTE: The starter anti-grind circuitry only works when the remote start

system is operating the motor and the Failsafe

installed.

The microprocessor at the heart of your system is constantly mon-

itoring all of the switches and sensors connected to it. It is

designed to detect any faulty switches and sensors and prevents

them from disabling the entire system. The microprocessor will

also record and report any triggers that occurred during your

absence.

If the security system is armed at the same time that an input is

active (such as a door opening or sensor triggering), you will hear

one siren chirp to indicate arming and a second siren chirp to indi-

cate Bypass Notification. A Bypass Notification chirp means that

the security system ignores the input that was active when the

system was armed, until that input ceases. Three seconds after that

Starter Kill relay has been

2000 Directed Electronics, Inc.

Table of Contents