Replacing The Display Latch - Dell Latitude C400 Service Manual

Display Assembly and Display Latch : Dell Latitude C400 Service Manual
1 display-feed flex cable
2 M2.5 x 12-mm screws (2)
3 display-feed flex cable hold-down board
4 pull tab
7. Remove the two M2.5 x 12-mm screws from the display-feed flex cable hold-down board.
8. Use the pull tab to disconnect the display-feed flex cable from its connector on the system board.
9. Move the display assembly to an upright position and pull it up out of the computer.

Replacing the Display Latch

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/C400/C400_SERVICE_MANUAL/display.htm (3 of 5)6/21/2004 1:20:13 AM