Removing The Display Assembly - Dell Latitude C400 Service Manual

Display Assembly and Display Latch : Dell Latitude C400 Service Manual
Back to Contents Page
Display Assembly and Display Latch
Dell™ Latitude™ C400 Service Manual

Removing the Display Assembly

Replacing the Display Latch
Removing the Display Assembly
NOTICE: You must remove the display assembly before you remove the palm
rest.
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any
installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted
metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the
procedure.
1. Remove the battery.
2. Remove the hard
3. Remove the center
4. Close the display.
5. Turn the computer over and remove the two M2.5 x 6-mm screws at the bottom back corners of the
computer.
Display Screws
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/C400/C400_SERVICE_MANUAL/display.htm (1 of 5)6/21/2004 1:20:13 AM
drive.
cover.
Computer" before performing the following