44
Dell Inspiron 7500 — Removing and Replacing Parts
PC Card Cage Removal
Figure 35. PC Card Cage Components
1
4-mm screw
2
PC card cage
3
System board
4
18-mm screws (4)
5
Audio bezel
This procedure assumes that you have removed the system board from the plastic
case. To remove the PC Card cage (see Figure 34), perform the following steps:
1.
Remove the 4-mm screw securing the audio bezel.
2.
Remove the audio bezel.
3.
Remove the four 18-mm screws securing the PC Card cage to the system board.
Use a support for the system board to prevent the board from flexing when the
card cage screws are removed.