Pc Card Cage - Dell Inspiron 7000 Service Manual

The Inspiron 7000 computer contains many screws of various sizes. To help
keep track of the screws, use a tackle or pill box as a storage device. Use the
location template in Table 4-2 to store the screws during disassembly.
Video card
(Figure 4-10):
2X K-head, M2x3L
Thermal shield
(Figure 4-22):
1X K-head, M2.5x4L
4X flat head, M2x4L
LCD brackets (13.3")
(Figure 4-27):
4X binding head, M2.5x6L
IR board
(Figure 4-31):
2X K-head M2.5x4L
PC Card heat sink
(Figure 4-35):
2X K-head, M2.5x4L
Hinge saddles
(Figure 4-40):
1X binding head, M2.5x6L
System board
(Figure 4-42):
3X K-head, M2.5x4L
Be careful not to scratch the computer plastic case by allowing the screws to
get between the work surface and the plastic case. Dell suggests a soft
padded work surface.
Hard-disk drive
(Figure 4-18):
4X K-head M3x3L
Display assembly
(Figure 4-24):
4X binding head, M2.5x6L
Inverter board
(Figure 4-26, 4-28):
1X K-head, M2.5x3L
Hard-disk drive
heat shield
(Figure 4-32):
5X K-head M2.5x4L
Heat exchanger/fan
(Figure 4-36):
2X binding head, M2x5L
Left hinge saddle
(Figure 4-40):
4X K-head, M2.5x4L
1X binding head M2.5x10L
1X pan head, M2.5x20L

PC Card cage

(Figure 4-43):
1X K-head, M2.5x4L
4X pan head, M2x18L
Combo module
(Figure 4-19, 4-20):
2X K-head, M2x2.5L
3X K-head, M2.5x3L
8X K-head M2x3L
Front bezel
(Figure 4-25):
4X binding head, M2.5x6L
LCD panel (14.1")
(Figure 4-28):
4X pan head, M2x4L
8X binding head, M2.5x6L
Touch pad assembly
(Figure 4-33):
4X K-head M2.5x4L
3X K-head M2.5x4L
LVDS board
(Figure 4-38):
1X K-head, M2.5x4L
Right hinge saddle
(Figure 4-40):
4X K-head, M2.5x4L
1X pan head, M2.5x20L
1X binding head M2.5x10L
Audio thermal shield
(Figure 4-44):
1X binding head, M2.5x10L
Removing and Replacing Parts
Keyboard
(Figure 4-21):
4X pan head, M2.5x20L
LCD panel (13.3")
(Figure 4-26):
8X binding head, M2.5x6L
Palmrest assembly
(Figure 4-30):
4X binding head, M2.5x6L
6X K-head, M2.5x4L
1X K-head, M2.5x4L
Speakers
(Figure 4-34):
5X K-head M2.5x4L
Processor board
(Figure 4-39):
3X binding head, M2x5L
RJ-11 card
(Figure 4-41):
1X K-head, M2.5x4L
Latch assembly
(Figure 4-45):
1X K-head, M2.5x4L
2X K-head, M2.5x4L
4-31