46
Dell Inspiron 7500 — Removing and Replacing Parts
Latch Assembly Removal
Figure 37. Latch Assembly Components
1
Springs (2)
2
Latches (2)
3
Center lock
4
Latch cover
5
4-mm screws (3)
6
LED board
7
LED cable
To remove the latch assembly (see Figure 36), perform the following steps:
1.
Disconnect the LED cable from connector JP2 on the LED board.
2.
Remove the 4-mm screw securing the LED board to the plastic base.
3.
Remove the LED board.
4.
Remove the two 4-mm screws holding the latch cover for the MegaBay and
media bay.
5.
Remove the latch cover.
6.
Remove the center lock over the two latches with springs.