Other Care - 3M Multimedia Projector S15i Operator's Manual

Other care

WARNING
use. Handling while the projector is in a high temperature could cause a burn and/
or malfunction to the projector. Before operating, make sure that the power switch is
off, that the power cord is not plugged in, and that the projector is cool adequately.
dangerous.
• Don't put a container containing water, cleaner or chemicals near the
projector.
• Don't use aerosols or sprays.
CAUTION
such as discoloration, peeling paint, etc.
• Do not use cleaner or chemicals other than those listed below.
• Do not polish or wipe with hard objects.
Inside of the projector
In order to ensure the safe use of your projector, please have it cleaned and
inspected by your dealer about once every year.
Caring for the lens
quality. Please take care of the lens, being cautious of the handling.
1. Turn the projector off, and unplug the power cord. Allow the projector to cool
2. After making sure that the projector is cool adequately, lightly wipe the lens
directly with your hand.
Caring for the cabinet and remote control
etc.
1.
Turn the projector off, and unplug the power cord. Allow the projector to cool
2.
After making sure that the projector is cool adequately, lightly wipe with gauze
or a soft cloth.
If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water,
and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
© 3M 2006 3M™ Digital Projector S15i
Do not take care of the projector during use or immediately after
Maintenance
45