Part Names; Projector - 3M Multimedia Projector S15i Operator's Manual

Part names

Part names

Projector

10)
Vent (
16, 45)
Lens (
6, 16)
Lens cover (
42)
Lamp door (
(Lamp unit is inside.)
5)
Control buttons (
Ports
(See below.)
14)
RGB port (
50)
Restart switch (
14)
CONTROL port (
Kensington lock slot
NOTE (*) About Restart switch: This projector is controlled by an internal
microprocessor. Under certain exceptional circumstances, the projector may not
operate correctly and the microprocessor will need to be reset. In such a case,
please push the Restart switch by using a cocktail stick or similar, and before
turning on again, make the projector cool down at least 10 minutes without
operating. Only push the Restart switch in these exceptional instances.
4
Bottom side
CONTROL RGB
S-VIDEO
K
Ports
Focus ring (
Remote sensor (
Speaker
Elevator button (
Elevator foot (
Filter cover (
are inside.)
Power switch (
AC inlet (
Elevator button (
Elevator foot (
Vent (
14)
(
VIDEO port (
VIDEO AUDIO
AUDIO port (
© 3M 2006 3M™ Digital Projector S15i
19)
8)
12)
12)
9, 10, 43)
16, 17)
15)
12)
12)
10)
14)
14)