3M Multimedia Projector S15i Operator's Manual page 40

Multifunctional settings
OPTION menu (continued)
Item
SERVICE
40
Selecting this item displays the SERVICE menu.
the ENTER button on the remote control to execute the item.
FAN SPEED AUTO ADJUST
FAN SPEED
fans. The HIGH is the mode for use at highlands etc. Note that the
projector is noisier when the HIGH is selected.
HIGH NORMAL
AUTO ADJUST
When DISABLE is selected, the automatic adjustment feature is
disabled, although rough adjustment is automatically performed
depending on the basic setting.
ENABLE DISABLE
• Depending on conditions, such as input image, signal cable to the
projector, environment around the projector, etc., the automatic adjustment
may not work correctly. In such a case, please choose DISABLE to
disable the automatic adjustment, and make adjustment manually.
GHOST
2.
FILTER MESSAGE
50h 100h 200h
After selecting "50h", "100h", "200h", or "300h", the message
"REMINDER ***HRS PASSED AFTER THE LAST FILTER CHECK"
will appear after the timer reaches the interval time set by the menu.
39)
(
message will not appear.
•
the internal temperature will rise, which could cause malfunction, or
reduce the lifetime of the projector.
• It is recommended to choose "100h" in general. Please be careful
with the operating environment of the projector and the condition of
chosen.
FACTORY RESET
all the items in all of menus will collectively return to the initial setting. Note
that the items LAMP TIME, FILTER TIME and LANGUAGE are not reset.
RESET CANCEL
Description
GHOST FILTER MESSAG
300h TURN OFF
© 3M 2006
FACTORY RESET
3M™ Digital Projector S15i