Connecting Power Supply - 3M Multimedia Projector S15i Operator's Manual

Connecting power supply

WARNING
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
• Never modify the power cord. Never attempt to defeat the ground connection
Before connecting, make sure that the power switch is the OFF position (pressed
the side marked "O").
1.
Connect the connector of the power cord to the AC inlet of the projector.
Firmly plug the power cord's plug into the outlet.
2.
© 3M 2006 3M™ Digital Projector S15i
Please use extra caution when connecting the power cord as
Power switch
AC inlet
Connector of the power cord
Setting up
15