Advertisement
Attach light adapter to back panel using four #8=32x3/8" screws, 4ram lock washers, 4ram flat washers and #8 nuts,
shown A.
Place lower back panel between side panels at rear of bottom shelf. Secure lower back panel to side panels using two
1/4-20x1/2" screws and 7ram lock washers each side. Secure lower back panel to bottom shelf using one 1/4-20x1/2"
screw and 7ram lock washer, shown B.
#8-32×3/8" screw
Qty.4
O 4ram lock washer
Qty.4
O
4ram flat washer
Qty.4
_
#8 Nut
Qty.4
#8 Nut
Adapter
1/4-20×1/2"screw
Qty.5
O
7ram lock washer
Qty.5
mm flat
4rnm lock
washer
7ram
lock washer 1/4-20×1/2"
screw
D]
This step requires two people
to lift and position
grill head
onto cart. Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging inside
the cart. Grill head must face open
side of cart.
Grill head
464222809,17
Advertisement
