Connecting The Accessories - Clarion CZ501A Owner's Manual

Front Right
Front Left
Rear Right
Rear Left
4-Speaker system
2-Speaker system
Front Right
Front Left
Not used.
Insulate each wire
8) Connecting the Accessories
• Connecting to the external amplifier
External amplifiers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
28
Gray
Gray/Black
White
White/Black
Purple
Purple/Black
Green
Green/Black
or
Black wire (Ground lead)
Gray
Gray/Black
Orange/White wire (Illumination lead)
White
White/Black
Purple
Blue wire (Auto antenna lead)
Purple/Black
Green
Green/Black
16-Pin Connector Extension Lead
(attached to the source unit)
Brown wire (Phone mute lead)
Connect to cellular phone mute lead.
Yellow wire (Memory back-up lead)
Connect directly to battery
Red wire (Power lead)
Accessory
Blue/White wire (Amplifier turn-on lead)
Connect to remote turn-on lead of amplifier
Connect to vehicle chassis ground
Connect it to the car power supply terminal
for illumination
Connect it to the car power supply terminal
for antenna
12V