Page 1
Owner’s manual Mode d’emploi Manual de instrucciones CZ509 ® Bluetooth CD/USB/MP3/WMA/AAC RECEIVER WITH CeNET CONTROL LECTEUR CD/USB/MP3/WMA/AAC Bluetooth AVEC COMMANDE CeNET RECEPTOR DE CD/USB/MP3/WMA/AAC Bluetooth CON CONTROL CeNET ® ®...
Page 2
Once you’re registered, we can keep you informed of important product information. Register at www.clarion.com - it’s easy to keep your Clarion product up to date. INFORMATIONS DE L’ENREGISTREMENT DE PRODUITS CLARION Cher client: Nous vous remercions d’avoir acheté...
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. Contents 1. FEATURES ... 3 2.
Bottom View of Source Unit CZ509 CAUTION USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Display Screen In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature. CZ509...
(Operating range: 30° in all directions) [AUX] input jack • Input jack for connecting external device. [SOUND] button • Press to switch to the sound adjust mode. CZ509 [ BND ] [IR RECEIVER] [ SCN ] [ RPT ] [ RDM ] [DIRECT] buttons •...
Page 7
• Commence fast-forward or fast-reverse mode. ] button • Perform preset scan while in the radio mode. • Play or pause a track while in CD/MP3/WMA/ AAC/USB/iPod mode. [Q] (EJECT) button • Press to eject disc. [CD SLOT] • Insert CDs here. CZ509...
DCP. Attaching the DCP 1. Insert the right side of the DCP into the main unit. CZ509 2. Insert the left side of the DCP into the main unit. Storing the DCP in the DCP Case Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case.
(1 sec.) to perform folder repeat play. [RDM] button • Press to perform random play. • When in MP3/WMA/AAC and USB/MTP modes, press and hold the button (1 sec.) to perform folder random play. CZ509...
4 Replace the cover and slide in until it clicks into place. Insertion guide CZ509 [RDM] button • Press to perform random play. • Press and hold the button (1 sec.) to perform disc random play.
[SOUND] button to return to the previous mode. ● Setting the BEAT EQ This unit is provided with 4 types of sound tone effects stored in memory. Select the one you prefer. ∗ The factory default setting is “OFF”. 2-1. Select “BEAT EQ” CZ509...
BASS<G>:The factory default setting is “0”. (Adjustment range: +7 to BASS<F>: The factory default setting is “50”. (Adjustment range: 50/100/200) CZ509 BASS<Q>:The factory default setting is “1”. ] or [ MID<G> : The factory default setting is “0”. MID<F> : The factory default setting is “500”.
• During SOUND adjustment mode, if no operation is performed for more than 10 seconds, this mode can be cancelled and return to previous mode. ] or [ ] button to select “ON” ] button, ] or [ ] button to select CZ509...
2. Press and hold one of the [DIRECT] buttons (2 sec.) to store the current station into preset memory. CZ509 Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially.
3. Press the [ ] or [ ] button to select the “CD” or “MP3”. • “CD” When playing music CD only. • “MP3” When playing music MP3/WMA/AAC only. 4. When setting is completed, remove the disc and reinsert it. CZ509...
When the unit enters the CD/MP3/WMA/AAC mode, play starts automatically. If there is no disc loaded, the indication “NO DISC” appears in the title display. CZ509 Loading a CD 1. Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL.
2. To select a track, press the [x] or [v] button. Top function The top function resets the CD player to the first track of the disc. Press the [BND] button to play the first track (track No. 1) on the disc.
1. Press and hold the [RDM] button (1 sec.) to perform folder random play. ● To cancel play 1. Press the operating button previously selected. ∗ The various play mode is canceled and the various play off mode appears in the display for 2 seconds. CZ509...
3. When the contact name is displayed, press the [x] or [v] button to select the contact name’s phone number. 4. Press the [ ] button to call the mobile phone No. ], [ ], [ CZ509...
3-3. After select the “TELEPHONE”, press the ] or [ ] button to select “MEMORY 1” to “MEMORY 5”, then press and hold the ] button (1 sec.) to memory. CZ509 4-1. Press the [ ] or [ ] button to select “SEARCH” or “WAIT”.
Page 21
] or [ ] button to change the ] or [ ] button to change the ] or [ ] button to select AUTO ”. ] or [ ] button to select CZ509 0 piece piece piece...
● Bluetooth Name This will display the name of the Bluetooth. 2-1. Select “BT NAME”. The Bluetooth name appears in the display. CZ509 ● Bluetooth Firmware version This will display the Firmware version of the Bluetooth. 2-1. Select “BT FW”.
CLARION”. 2-1. Select “MESSAGE INPUT”. 3-1. Press the [ ] button. 3-2. Press and hold the [BND] button (1 sec.) to clear the old message. 3-3. Press the [x] or [v] button to move the cursor. ] or [ CZ509...
2-1. Select “BLINKLED”. 3-1. Press the [ ] or [ ] button to select “ON” or “OFF”. CZ509 ● Setting the external amplifier ∗ The factory default setting is “OFF”. 2-1. Select “A-CANCEL”. 3-1. Press the [ ] or [ ] button to select “ON”...
1. Press and hold the [DISP] button (1 sec.). 2. Select “AUX SENS”. 3. Press the [ ] or [ ] button to select “HIGH”, “MID” or “LOW”. Note: • When AUX mode is selected, AUX IN sensitivity can be set. CZ509...
For information regarding supported portable audio players, consult your nearest Clarion dealer, or visit Clarion’s website. • Insert and remove a USB memory/MTP device only when the device is not being accessed. Connecting or disconnecting...
USB/MTP mode is selected, since it may result in loss or damage to data on the USB memory/MTP device. Always backup and save important data on your computer. 2. Remove the USB memory/MTP device from the USB cable. CZ509...
• The unit will not operate, or may operate improperly with unsupported versions. • For a list of compatible Apple iPod unit with the this model, please contact your Clarion dealer or www.clarion.com. • “Made for iPod” means that an electronic...
Page 29
[1] : PLAYLISTS [2] : ARTISTS [3] : ALBUMS [4] : SONGS [5] : GENRES [6] : COMPOSERS 2. Press the desired [DIRECT] (1-6) button to select the category. ∗ Subfolders may be displayed, depending on the category. buttons to CZ509...
Page 30
This unit supports the display of title information transmitted from a connected iPod. • Character code information is UTF-8; displayable characters include English alphanumerics, some symbols, and some umlaut characters. • Unsupported characters will be replaced by asterisks (*). CZ509 buttons to...
This unit can control the following satellite radio receivers: • XM Satellite Interface Adapter (Mini-Tuner Included) : CNP2000UC Clarion cable for CNP2000UC : CNPCLA1 • SIRIUS Satellite Radio Receiver : SIRCL3 • SIRIUS Satellite Translator Adapter : CLA-SC1 (which needs Sirius universal Tuner sold separately.)
3. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current category into preset memory. CZ509 Notes: • When the name of a channel stored in memory is changed by a broadcasting channel, the display may show a channel name that differs from the stored name.
The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled. 1. Press and hold the [RDM] button (1 sec.). ● To cancel play 1. Press the operating button previously selected. CZ509...
DCP or main unit connectors are dirty. No sound heard The speaker protection circuit is operating. CZ509 Cause Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Consult your store of purchase.
Page 35
Disconnect the device and reconnect. If the device is still not recognized, try replacing with a different device. Disconnect the device and reconnect. Try reversing the connection direction of the device (usually the brand name surface should be facing left). Replace with a new device. CZ509...
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase. CZ509 Cause This is a failure of CD deck’s mechanism and consult your store of purchase.
1-3/4" (Width) ✕ 4-5/16" (Height) ✕ 7/16" (Depth) [44 (W) ✕ 113 (H) ✕ 11 (D) mm] Power Output : 22 W RMS x 4 Channels at 4 and 1 % THD+N Signal to Noise Ratio: 92 dBA (reference: 1 W into 4 ) CZ509...
Microsoft may include a revocation list with the licenses. Content owners may require you to upgrade WMDRM to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade. CZ509...