Connecting The Accessories - Clarion NX503E Installation Manual

■ Connecting the parking brake lead
Connect the lead to parking brake lamp ground in the meter panel.
● Connecting the parking brake lead to lamp ground allows you to watch video images
when the parking brake is engaged.
● When the parking brake lead is not connected, the monitor will not display video images.
Parking brake lamp
+ lead to battery
Parking brake
Electro-tap
Parking brake
signal lead
Parking brake lead
(Grass-green)

Connecting the Accessories

■ Connection to the Rear Vision Camera for vehicle
The Rear Vision Camera for vehicle can be connected to optional Rear Vision Camera input
cable (CCA-644) with RCA pin cable. For detailed information, refer to the instruction sheet
or manual for the Rear Vision Camera.
● Be sure to connect the reverse gear lead to the vehicle's relevant terminal.
● Connect the Rear Vision Camera to the RCA pin cable; if not, the screen turns black while
the gearshift lever is in the reverse gear position.
● How to attach the electro-tap
1. Place the Parking brake lead at the stopper,
and fold it back in the direction of the arrow.
2. Pass the Parking brake signal lead through,
and fold it back in the direction of the arrow.
Parking brake
Parking brake
signal lead
signal lead
Stopper
Parking brake lead
(Grass-green)
NX503E/FX503E 57