Step 7 Order Optional Network Card Accessories - Cisco UCS C240 M3 Manual

STEP 7 ORDER OPTIONAL NETWORK CARD ACCESSORIES
Copper twinax cables and SFP optical modules may be ordered to support the two-port network cards that
are available with the server.
Choose Optional Twinax Cables
Table 9 lists the copper twinax cables available for the PCIe cards. You can choose cable lengths
of 1, 3, 5, 7, or 10 meters. The two longer cables (7 and 10 meters) are active, which means
that they contain active components within the SFP+ housing to improve signal quality.
Table 9 Available Twinax Cables
Product ID (PID)
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
SFP-H10GB-ACU7M
SFP-H10GB-ACU10M
Approved Configurations
(1) Choose Up to Two Twinax Cables for Each Network Card Ordered
You may choose one or two twinax cables for each network card ordered. The cables can be
■
different lengths; however, you would normally order two cables of equal lengths to connect
to the primary and redundant network switching equipment.
Caveats
The twinax cables listed in
—
—
—
—
Cisco UCS C240 M3 High-Density Rack Server (Large Form Factor Hard Disk Drive Model)
PID Description
10GBASE-CU SFP+ Cable (1 M)
10GBASE-CU SFP+ Cable (3 M)
10GBASE-CU SFP+ Cable (5 M)
10GBASE-CU SFP+ Cable (7 M)
10GBASE-CU SFP+ Cable (10 M)
Table 9
N2XX-ACPCI01 (Cisco UCS P81E Virtual Interface Card/ 2-port 10Gbps)
UCS-PCIE-BSFP (Broadcom 57712)
N2XX-AEPCI01 (Emulex OCe10102-F)
N2XX-AIPCI01 (Intel Dual Port Ethernet X520)
can be ordered only for the following PCIe cards:
CONFIGURING the SERVER
23